Before and After Water Tank Refurbishment

Cost Effective Alternative to Replacing a Water Tank

A corroded or leaky water tank is annoying by itself, but if ignored, it can lead to more serious problems. Leakage can quickly multiply water bills, as well as causing untold water damage. And the contaminants that seep into a leaky tank can pose a health threat and promote the growth of deadly bacteria. For these reasons, it’s essential to handle the problem as soon as it is discovered.

But replacing a water tank can be very expensive, even in a single residence. When you consider the size of commercial water tanks, it can be very expensive indeed. And that’s not even allowing for the cost of lost productivity while a new system is installed.

Fortunately, it is often possible to repair a failing water tank. Of course, this depends on the degree of damage. A tank that has been ruptured through an industrial accident may be unsalvageable. But in most cases, there is hope. Refurbishment can fix the problem at a fraction of the price of replacing the tank.

Water Tanks & Services Ltd. specialise in water tank refurbishment. They have worked on jobs of all sizes, from residential customers to large property management firms and huge public buildings. Their experience covers tiny water tanks in cottages and huge underground reservoirs in water treatment plants. So they are familiar with all the challenges a leaky tank can pose.

The first step in addressing the problem is usually to work out just how bad the damage is. This usually requires an internal inspection of the tank. But it’s often difficult to gain access without shutting down the entire water system, which can be very expensive.

The solution is a remote control camera, which can investigate conditions inside the tank without interrupting service. The camera is housed in a remotely operated vehicle, like a tiny submarine. It can capture high-quality photos and videos of the internal conditions, detecting problems that would be impossible to find even with a full manual inspection.

For huge water systems or systems that are impossible to inspect in this manner, water testing can provide a much-needed clue. Chemical and mineral traces can help to locate the source of the leak, and a manual inspection can then confirm the degree of damage. Water Services Ltd. is able to run a complete battery of water tests quickly in a state of the art laboratory. Their skilled technicians use this data to quickly isolate the cause of the problem.

Once the damage has been quantified, the next step is to fix it. The exact approach will vary depending on the material and construction of the tank. In some cases, Water Tanks & Services Ltd. will use fiberglass resins to fill in the damaged areas and coat the inside of the tank with epoxy resin, protecting it from further corrosion. They use fast setting epoxy coatings, so the tank can return to full service quickly after it has been refurbished.

One of the important advantages of the epoxy resin is that it doesn’t contain harmful solvents. This keeps the water supply safe and clean after the work has been completed.

They also use their proprietary Polypropylene lining system to prevent leaks. They are able to install this without using any harsh chemicals or solvents thanks to a hot air welding technique. The installation is very fast, as they manufacture the lining to fit the tank. This means that their staff can install the lining in a few hours, and the tank can return to service immediately.

The lining is very durable, and can resist routine corrosion. It is even strong enough to stand up to highly corrosive chemicals – they use these linings in acid storage tanks, too. The lining will last for decades of normal use, and is easy to repair if it is punctured.

With a vast breadth of experience in the field of water tanks and systems, Water Tanks & Services Ltd. are able to replace a water tank that is beyond repair. Most of the time, they can refurbish an existing installation at a fraction of the cost, extending the life of the tank by decades.

Water Tank Installation

The Importance of Professional Water Tank Installation

The importance of hiring a professional company when it comes to your water tank installation is something that simply cannot be overlooked. Not only are there various technical aspects to take into consideration, but safety is something that should also never be compromised.
The actual installation process is relatively straightforward, however, it is imperative that every water tank is WRAS compliant to make sure that it meets industry standards. This compliance covers the manufacturing of the water tank itself and in our case each tank is manufactured from Glass Reinforces Plastic, the best material in the industry. Every tank is also insulated correctly along with an airtight lid and relevant pipes and fittings. In addition, the tank is subjected to a full chlorination after the installation with this coming as standard.
If we can also spend a moment discussing the installation method as well as the service that we offer. Our team uses the latest equipment to reduce any risk whilst working in your establishment. Each individual is versed in the various health and safety requirements and that is one reason why even the cutting equipment that is used has spark free technology to further reduce those risks. In addition, our engineers are experienced in removing old tanks and installing your replacement to the existing pipework therefore reducing not only the cost to you, but also the time it takes to complete the job.
By hiring a professional company that has the relevant expertise it undoubtedly reduces the stress associated with the installation of your new water tank along with potential future issues surrounding continued maintenance. You can feel confident that not only do you have a guarantee with the work that is being carried out, but that the installation team is both qualified and experienced which means they are capable of handling any problem that may arise. Finally, do remember that we are happy to answer any questions that you may have regarding the installation process and we can be contacted using various means.

Water Tank Cleaning

Benefits of Water Tank Cleaning For Homes And Businesses

More homes and businesses are relying on efficient water storage facilities to ensure a constant supply of clean drinking water. These facilities can be costly to set up, and must therefore be properly maintained to minimise repair and replacement costs. One way of doing this is through professional water tank cleaning services.

Any type of water storage facility requires regular cleaning and maintenance to guarantee safe and clean drinking water. Tank cleaning prevents silt, scale, biofilms, debris and microorganisms from accumulating in the tank. It is a vital part of water system maintenance and should be done on a regular basis.

Tank cleaning is not only a hygienic measure, but a stringent requirement by health and safety regulations. Schools, hospitals and other commercial and industrial properties are required by law to maintain clean water supply through regular water tank cleaning.

Regular cleaning has many benefits for your water supply system aside from eliminating the risks of contamination. It prevents rust and corrosion caused by organic debris, which can severely damage your tank. It also stops silt, debris and pests from blocking your valves and pipes, which is a common cause of water shut offs. This will greatly lower your maintenance costs and prolong the lifespan of your tank and associated systems.

We provide both small and large scale tank cleaning services to homes and commercial properties all around the UK. Our engineers are experts at efficient and cost effective tank cleaning. We ensure that your entire water system is free of dirt, germs and blockages which may compromise the quality and safety of your water supply. Our cleaning services are environmentally safe and conform to every regulatory requirement.

We also carry out comprehensive surveys of the entire water system to determine its maintenance and cleaning needs. This also involves legionella and microbial contamination risk assessments and water quality tests. Only then can the safety and hygiene of your water supply be guaranteed.

Water tank cleaning should only be carried out by experienced and highly trained professionals. This is the only way to minimise the risk of damage and contamination to your water system.

Water Tank Lids

Tough and Durable Water Tank Lids

Water tanks need to be properly installed and maintained to ensure a constant supply of clean and safe drinking water. More often than not, debris, pests and other contaminants enter into water systems, endangering the health of households. All tanks must therefore be fitted with a suitable lid to prevent such contamination.

Water tank lids are a very important part of the tank. Aside from presenting a barrier to dirt and pests, they allow access into the tank when cleaning and other maintenance tasks are needed. They also provide insulation to the tank, preventing water temperature fluctuations during hot summers and cold winters.

For water tank lids to be effective at these functions, they must be manufactured from the right materials. This will ensure durability and conformity to safety regulations. Although fiberglass is commonly used, it has several disadvantages which make it a less than ideal material for tank lids. Fiberglass is flexible and cost effective, but with time, it can delaminate and crack as it ages. This will raise tank maintenance costs, since the lid will require time consuming checks and replacements.

A better alternative is rigid polypropylene, which is a tough plastic that has proved its utility for the last two decades. Polypropylene does not age as quickly as fiberglass, making it more durable and less likely to crack if dropped accidentally. This modern material is resistant to shock and impact, and also offers protection against corrosion. Additionally, polypropylene has greater thermal insulation than fiberglass, which ensures the water remains cool and fresh in all types of weather.

We are experts at manufacturing and installing rigid polypropylene water tank lids in every shape and size. We are highly adept at fitting highly durable and long lasting lids for all residential, commercial and industrial tanks. We use hot wielding techniques during installation, which do not require solvents or adhesives. This ensures fast and cost effective insulation.

Rigid polypropylene is the best choice for all types of water tank lids. Use this tough material to guarantee durable, well insulated and long lasting lids for all your tanks.

Water Tank Epoxy Coatings

Durable Protection Through Water Tank Epoxy Coatings

Traditional steel and concrete tanks are tough and have a wide variety of applications in both industry and homes. They have been used for ages to provide reliable water and liquid storage all over the world. These tanks require a lot of maintenance for several reasons, the main one being their susceptibility to damage by corrosion and rust.

Concrete and steel tanks deteriorate when exposed for long periods to water, corrosive chemicals, sludge or wastewater. This leads to a lower quality of water through contamination by bacteria and other microorganisms, rust and pest infestations. This can seriously endanger health while damaging the tanks as well. For these reasons, concrete and steel tanks can have a shorter lifespan than anticipated, and usually rack up huge maintenance and repair fees.

Old and aging tanks can be refurbished and brought back to great condition through water tank epoxy resin coating. This is a cost effective and efficient method of repairing severely corroded and rusted tanks. Epoxy coatings provide a resistant coating on the interior and exterior of the tank to prevent further corrosion or damage.

We provide premium quality water tank epoxy coatings. Our technicians are highly experienced in epoxy coating application to a wide variety of tanks in every industry. The resin based coatings DWI and WRAS certified to offer unparalleled protection to the tank. They can be spray-painted or applied using a roller and brush, and come in several colours including blue, red, yellow, light grey and green.

Water tank epoxy coatings are mainly used for refurbishing large tanks and to prevent further corrosion after fibreglass repair works. The epoxy coating is ideal for sprinkler, cold water, header, process and potable water applications. It is also available in industrial specifications as a resistant coating for liquid tanks, and comes as a base and hardener in 2.5L and 5L cans.

Our water tank epoxy coating has a 5 year guarantee for the two coat system, while the three coat system comes with a ten year guarantee. To save on high tank maintenance or full replacement costs, procure an epoxy coating to increase the durability and longevity of your aging tanks.

Water System Chlorination

The Importance Of Water System Chlorination

Despite 70% of the earth’s surface being made up of water, only less than 1% of it is suitable for human consumption. To meet the increasing demand for fresh and drinkable water, most societies rely upon water system chlorination. Without this, billions of people around the world will suffer from disease and a shortage of clean water.

Every water storage system is vulnerable to contamination if not properly sanitised. Tens of people around the UK die every year from Legionnaires disease, which is a fatal type of bacterial pneumonia. Many other people on the globe also suffer from other water borne diseases that can be easily prevented through water system chlorination. This is because disease causing pests, debris and rotting organic matter can enter into water systems if the right measures are not undertaken.

We are leading water system chlorination experts with experience in all types of domestic, commercial and industrial water sanitation. Our highly trained technicians have fulfilled complex water hygiene contracts for both private and public entities around the UK. We predominantly use Sodium Hypochlorite and Chlorine Dioxide to sterilise water and get rid of bacteria, viruses and other dangerous infestations and biofilms.

Water system chlorination is a proven and environmentally safe method of water sanitation. It is an easy to use, cost efficient and scalable option for water decontamination. It involves dousing the header tank to 50ppm of chlorine, and running the chlorinated water through the system for at least an hour. The entire system is then flushed with fresh water to remove the chlorine. The chemicals can also be neutralised to save vast amounts of water and thereby reduce costs.

We are experts at chlorinating main, booster tank, hot and cold water systems, as well as existing or new installations. To ensure success, samples are taken from the water system and tested for legionella, total microbial contaminations, E-Coli and Dipslides among other infestations. This guarantees the safety of your entire water system. Our testing regimen further complies with all L8 regulations and risk assessment protocols.

It is important to have a comprehensive survey and risk assessment of your entire water system done regularly to prevent contamination. Water system chlorination is the best and safest sanitisation option for all types and sizes of water systems.

Water Tank Installation

Selecting The Correct Tank For Water Tank Installation

The challenges of water conservation throughout the world demand highly innovative solutions. Every home or commercial premise can drastically lower its water bills through rainwater harvesting. This is an efficient and cost effective method of increasing your water supply in an environmentally friendly manner. Although rainwater is not fit for human consumption, it can replace more than 50% of your domestic needs, including cleaning, laundry and garden watering, after a little treatment or filtering.

While the benefits of water tank installation are indisputable, choosing the best type of tank must be carefully considered. Traditional materials such as steel and concrete have been used for long time. Despite their wide range of applications, they have several disadvantages which can increase the costs of water storage.

To begin with, steel and concrete tanks are expensive to install and maintain. They are susceptible to corrosion and rust, which can cause leakages, tank collapse and severe damage. Tree roots also routinely bore through concrete. This will require regular and costly maintenance, and can greatly reduce the lifespan of the tank. To prevent this, modern and more durable materials should be utilised.

Glass Reinforced Plastic or GRP tanks are the perfect solution for water tank installation. We supply high quality, environmentally friendly and long lasting GRP tanks for every domestic and commercial application. These tanks are made from 100% virgin resin without chalk fillers, which guarantees a lifespan of up to 50 years. In addition, they all come with a manufacturer’s guarantee.

GRP tanks do not rust or corrode, and are resistant to chemicals, extreme temperatures, impact and shock. They require very little maintenance or repairs, saving you lots of money in the long run. They are widely used in every type of industry, including food processing and chemical industries, due to their longevity and durability. They can also be fabricated as 1 piece or multi-sectional tanks to suit any application.

GRP water tank installation is the best guarantee of cool, fresh and clean water supply to homes and businesses. Save money on tank maintenance and installation by choosing this modern and long lasting material for all your water storage needs.

Water Tank Lining

The Unrivalled Advantages of Water Tank Lining

Rainwater harvesting is the most efficient way of lowering your water bills, while ensuring an uninterrupted supply of fresh water. The quality of rainwater can only be guaranteed by well maintained and clean tanks. In fact, with a little treatment, rainwater can serve almost every need in all homes and commercial premises.

Tanks made from traditional materials such as steel and concrete are liable to rust, corrosion and damage. This leads to leaks and greatly lowers the quality of water stored in them. Damaged tanks can pose a serious health problem if contaminated by dangerous microorganisms such as Legionella, or infested by rodents and other pests.

A perfect solution for maintaining the integrity of your water tanks is through water tank lining. We are industry pioneers in lining of every type of tank, including domestic, process and acid tanks. Our unique and proprietary polypropylene tank lining was developed by our own technicians, and has been widely used for the past two decades. It is made to withstand corrosion, extreme temperature, shock and wear, and provides long lasting protection for corroded, rusted or damaged tanks.

Water tank lining is unparalleled when it comes to tank refurbishment. Firstly, it manufactured then brought to site for installation. This allows average sized tanks to be lined in a matter of hours, while larger tanks can completed in less than a day. This is in contrast to other refurbishment solutions, which cost more in terms of labour and increased downtime.

Secondly, our water tank lining is made from hot air wedge welding, which makes it resistant to damage. It needs no solvents or curing time unlike outdated butyl liners, and can be easily repaired by patching over the damaged area. The lining provides a smooth and glass-like finish for clean and dirt-free water storage.

Thirdly, polypropylene water tank lining is multi-functional and has been extensively used in severely corroded and leaking acid, process and sprinkler tanks with unrivalled success. Its durability and toughness also makes it popular for use in bunded areas.

Finally, our water tank lining meets every health and safety regulation, and is the perfect cost effective solution for restoring your tank to perfect condition. This is the best way to ensure your tank lasts longer without the need for regular and costly maintenance.

Water Tank Refurbishment

Why Tank Refurbishment Is The Best Option For Your Tank

Rainwater tanks are the most expensive part of any rainwater harvesting system, so getting the most out of them goes without saying. Tanks made from concrete or steel require regular maintenance to patch up cracks, leaks and prevent rust from causing permanent damage. Without proper care and maintenance, these tanks will have to be replaced with time, which adds an undesirable cost to your water harvesting efforts.

Aging water tanks do not have to be condemned to replacement. New and cost effective water tank refurbishment methods can greatly prolong the life of your old tank. This will prevent water shortages occasioned by shut offs and tank collapses, while protecting your structures from water damage caused by leaks, corrosion and mould. Water tank refurbishment may also be necessary to bring old tanks in line with new building, health and safety regulations.

We provide several water tank refurbishment solutions to suit every type of tank in domestic or commercial use. They involve:

Polypropylene tank lining: This is a durable lining that is resistant to corrosion, heat, shock and extreme temperatures. Developed by our own engineers, polypropylene lining can restore old, damaged and aging tanks to great condition, and eliminate the need for a full replacement. It can be done in a few hours or within the day for any size of tank, which greatly lowers costs.

Epoxy tank coating: All our premium epoxy resin coatings are DWI and WRAS certified, and come in a wide variety of colours. Applied to the inner surface of the tank, the coating provides a long lasting seal for cracks and corroded surfaces. Extra coatings are applied to prevent further corrosion and rust. It is an ideal water tank refurbishment solution for all types of tanks including process, acid and alkali tanks.

Water tank refurbishment can protect and prolong the life of your tanks, helping you eliminate the huge costs of a full tank refurbishment. This will ensure you never have to suffer from shut offs, leaks and tank collapses that can cause expensive damage or even injury.